Graphtec CE6000-60 PLUS 24 Cutter with Stand FREE SHIPPING

CE6000 Plus Series is equipped with professional features such as a registration mark sensor. Supported software includes advanced cutting functions that improve work efficiency and productivity. CE6000 Plus Series is also cleaner, greener with an electronic design and manufacturing process that minimizes the environmental impact of the hardware equipment throughout its entire life cycle. EXPAND THE RANGE OF POSSIBLE CUTTING OPERATION WITH HIGH-QUALITY, HIGH-RELIABILITY, HIGH-PERFORMANCE, AND EASY TO OPERATE. THE COST / PERFORMANCE LEADING CUTTING PLOTTER CONTINUES TO EVOLVE.

MAX FORCE OF 4.41 N (450 GF) SPEED OF 1000 MM/S. RELIABLE LONG LENGTH TRACKING UP TO 196.85 IN.

3-SIZES TO BEST SUIT YOUR APPLICATIONS. With maximum force of the 4.41 N (450 gf) and a maximum speed of 1000 mm/s, it enable to cut various media with high productivity. Its media stocker ensures a more stable media feed as up to 16.40 ft long.

The long size of cutting object is able to cut accurate and stable using the automatic paneling function. The stand and basket is used. In the CE6000-40 Plus Series, it is up to 6.56 ft long. It enable to support wide range of media including self-adhesive vinyl film for signs, self-adhesive printable film/paper media for labels/stickers, and thick paper for POP as the table advertising. The size of three models corresponds to their mountable media with: 484 mm 19 in.

, and 1346 mm 52 in. It enable to support variety of applications. SELF ADHESIVE SHEET (MARKING, LABEL).

PAPER OR OTHERS (MEDIAS WITH NO LINER). Each CE6000 comes standard with.

3.7 inch wide user-friendly LCD control Panel. Setting can be easily configured using the large LCD (3.7-inches, 240x128 dots) and tactile control panel. It is also icon driven and supports 10 languages.

High adaptability to the operating environment. The design of the media feed system ensures that loaded media is acclimated to the ambient temperature and humidity before plotting or cutting. Together, these two media feed elements ensure reliable cutting and plotting quality within the desired operating environment. Easy to use in simple operation mode. Two set up menus: simple and normal are available an can be chosen by the operator as desired.

Media brake on the media stocker. A brake system is incorporated to assist loading heavy rolls of media properly. CE6000-60 PLUS / 120 PLUS. Dual tool configuration and easy switching between cutting and plotting. The pen carriage holds both a plotting pen and a blade at the same time to enable easy switching between plotting and cutting operations. Four sets of user-specified setup parameters are retained in memory for instantaneous recall. The pen is for plotting and detailing graded patterns with seams, text, notches, Grain direction, etc. Innovative features include maximum cutting speeds of 39 ips and with a maximum cutting force of 450g.

It also features an easy to use menu navigation system with eight groups of preset conditions which facilitates instantaneous recall of pre-programmed job-specific plotter setups. Tri-port connectivity (USB, parallel and serial) makes the CE6000 Plus Series compatible with virtually any computer configuration. Reliable long length tracking up to 196.85 inchs long. The built-in front control panel provides complete parameter control including eight preset cutting conditions, as well as advanced features like tangential control mode, down force offset, pen up speed, blade wear monitoring and more.

With a 25 pin RS-232C or the High Speed USB 2.0 control interface, the CE6000 Plus Series is compatible with legacy computer systems as well as the latest PCs available now and for several years to come. SWITCHING THE PRESSURE OF THE CENTER PUSH ROLLER. The number of push rollers has been increased to five; with the three inner rollers having two pressure settings (low and normal) to prevent media lifting and to suit a wider range of substrates. A media sheet guide is also included to reduce static and to improve long length tracking. These two new additions ensure a more stable media feed and higher productivity.

MEDIA BRAKE ON THE MEDIA STOCKER. ARMS 5.0 for high precision cutting in the print and cut application. ARMS is an abbreviation for Advanced Registration Mark Sensing system, which uses sensors to detect registration marks and performs the AXIS ALIGNMENT. It is able to adjust received contour cutting data in the cutting plotter to align with the printed image. It enables to significantly improve productivity in the Print & Cut applications that makes stickers or decals. This feature compensates for any skewing and shrinking on the X and Y-axis using sophisticated algorithms. This leads to more accurate registration and improves the reliability and quality of Print & Cut. ARMS system expands the cutting area to include outside of the area enclosed by registration marks. This increases production efficiency by reducing media waste.

When a design is printed using the matrix copy function, the marks are read and contour cutting is repeated for each copy. It can significantly improve productivity for Print and Cut.

This function is available when supported software is used. COPY key allows fast access for making copies of downloaded data. It also supports cutting data including the ARMS control command for processing multiple sheets without a PC. The item "Graphtec CE6000-60 PLUS 24 Cutter with Stand FREE SHIPPING" is in sale since Wednesday, October 4, 2017. This item is in the category "Business & Industrial\Printing & Graphic Arts\Plotters & Wide Format Printers".

The seller is "heattransfervinyl4u" and is located in Buena Park, California. This item can be shipped to United States.

Model: CE6000-60 PLUS
Country/Region of Manufacture: Japan
MPN: Does Not Apply
Brand: Graphtec