Pm-1236t 12x36 Ultra Precision Lathe Single Phase Taiwan Made Free Shipping

THIS MACHINE COMEs WITH A STAND. IF YOU WOULD LIKE A lathe without the STAND, PLEASE SEE OUR OTHER LISTING. Main Features Of This Machine. Extremely High Quality Lathe, meant for very high precision work. Single Phase power available, no converters needed, or choose 3 phase if you prefer 3 phase operation.

High Precision Japanese spindle bearings, +/. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), a proper 8 TPI main leadscrew, cross and compound screws are 10 Threads Per Inch. High Precision Japanese Spindle Bearings, +/. 6 Economy 3 Jaw Chuck, with one Set each Inside and Outside Jaws. T Slotted Compound Slide (To allow easy quick change tool post installation). Threading Dial (4 Travel Dial, 32 Tooth).

D14 Camlock Quick Change Spindle. Large 1-9/16 Spindle Bore clear through spindle for through-headstock work Short Spindle Length, only 13-3/4, perfect for hobby gunsmithing work Extra thick spindle wall for extra rigidity, almost double when compared with most other machines in this size Power feed on Carriage, and Cross Slide, both left and right, and in and out, for both turning and facing operations with automatic feed. Allows for the best surface finish in all directions. Induction Hardened and Precision Ground Bed Ways to resist wear and give a longer service life Inch AND Metric thread cutting ability is a standard feature, NO CHANGE GEARS for any inch thread or feed rate, only change gears required are for Metric threads 4 Travel Thread Dial, 32 tooth gear on thread dial, 8 TPI Main Leadscrew for easier threading using the half nut / thread dial Large diameter, extra thick wall tail stock quill for more rigid and accurate tail stock operations, Locking Tang in tail stock is provided Removable Gap for larger diameter work when needed High quality electronics used throughout machine, very reliable contactors, motors, etc. Slip Clutch is standard on feed rod, to help prevent overloading damage of feeds and allow the use of a solid carriage stop for repetitive work Precision Tapered Roller Bearings used in spindle, for the ultimate in long life, high precision, and best surface finishes.

0001 for ultimate precision True INCH PITCH main lead screw, cross feed, and compound lead screws make it easy to use for the INCH measurement System, yet still has the Metric readings on dials for the ultimate in versatility for any job that may come about No Confusing Metric Conversions like with some other brands Splash oil bath lubrication in Headstock, and Apron, for efficient lubrication, and long life, yet simple and reliable, and does not require any filter changes or pump maintenance as with oil pump lubrication systems. Swing over bed: 12 Max.

Swing over cross slide: 6 Max. Swing in gap: 18 Center Height: 6 Spindle Center Line Distance from Floor: Approx.

Distance Between Centers: 36 Width of Bed: 7-1/2 Bed Height: 11.5 Spindle Bore: 1-9/16 Spindle Taper, Internal: MT #5 Spindle Mounting System: Cam Lock, D1-4 Spindle Speeds: 90-1600 RPM, 12 Steps Bed Length: 59-3/4 Lead Screw Diameter / Pitch: 7/8 / 8 TPI Feed Rod Diameter: 3/4 Inch Thread Cutting Range: 4-112 TPI, 40 Different Threads Metric Thread Cutting Range. 25-7.5mm Pitch, 24 Different Threads Longitudinal Feed Range (Left and Right). 002.02 Inches Per Revolution Cross Feed Range (In and Out). 001.01 Inches Per Revolution Spindle Length through headstock, Protruding End to D1-4 Chuck Mounting face: 13-3/4 Spindle Length through headstock, Protruding End to 3 Jaw Chuck face: 17-1/4 Cross Slide Travel: 6-3/4 Compound Travel: 3-1/2 Tail Stock Quill Diameter / Travel / Taper: 1-9/16 / 4 / MT#3 Main Motor Horsepower: 1.5 HP Voltage / Phase/ Amps: 220 Volt, Single Phase, 10 Amps Max Machine Dimensions Assembled with Stand 51H x 29W x 66L Machine Weight, Without Stand: 850 LBS: Machine Weight With Stand: 1,100 LBS. If you would like to stop in and see one in person, we are at. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Check out our other auctions for more lathes and mills.

The item "PM-1236T 12X36 ULTRA PRECISION LATHE SINGLE PHASE TAIWAN MADE FREE SHIPPING" is in sale since Tuesday, September 10, 2019. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes".

The seller is "qualitymachinetools" and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

Model: PM-1236T SINGLE PHASE w/STAND
Country/Region of Manufacture: Taiwan
MPN: PM-1236T SINGLE PHASE w/STAND
Brand: Precision Matthews